EMF avoidance
-
Best tips for reducing artificial EMF exposure? I’ve read that most “emf blocking” products end up amplifying the signal and making it worse.
Obviously just getting rid of electronic devices is the most straightforward but suppose I can’t, anyone have some good tips?
-
@Lothric I don't have a solve for you but I've heard repeatedly that most people run into trouble because they don't 'clear' the space of EMF before blocking it, for example if you are to wear an EMF blocking jumper, it will still get in through the sleeves but then not be able to pass on through.
Barring a faraday cage I'm unsure how you could resolve this.
-
I had to use WiFi because I can't find time to run the Ethernet cabling throughout the house. So the least I could do is to set up timers so around my sleep time the wireless routers are turned off. I get some rest this way at least for 1/3 of my life.
I think I'm still better off than living in a condo or apartment where I get exposed to my neighbors' WiFi.
It's still a given though that in the city I have to accept being exposed to emf from cellphone voice and data emf radiation.
All the more reason to have a high metabolic constitution as this makes me less susceptible to insults such as emf radiation.
Having a regular intake of food that is rich in copper also helps, together with enough exposure to red lighting, either thru the sun or thru red light therapy, to build enough cytochrome oxidase, which mitigates the effect of emf radiation.
Some fans' motors can emit high emf radiation as well, bit we don't know which does and doesn't I don't have one personally, but my brother bought an emf detector and I ran it to see which of my fans emit dangerous levels of radiation. I stopped using the small Vornado fans I have (the teeny weeny ones).
Lastly, I as much as possible use the speakerphones on my phone and I put my phones OK n airplane mode when I sleep. And I don't use wireless earbuds and minimize the use of Bluetooth.
-
Viewing lots of sunlight, being outdoors, grounding yourselves. I would assume if you can't avoid emfs the next best thing is to ground as much as possible. Walking bearfoot on grass , touching trees, copper wire etc.
-
@Lothric said in EMF avoidance:
I’ve read that most “emf blocking” products end up amplifying the signal and making it worse.
I found the following site to be pretty informative:
https://emfacademy.com/emf-paint/It goes into different brands, techniques, things to watch out for, etc. It seems that many coatings block / reflect but certain ones do absorb.
I have dealt with similar issues when raising vegetable plant seedlings in the basement during early cold spring. If you use crinkly aluminum foil to reflect, refocus and "reclaim" light it will cause a phenomena referred to as hotspotting or flashing. A broad swath of light would hit a wrinkle in the foil, concentrate into a smaller beam, and cause odd effects on the plants like elongated leaf stems and other deformities. Apparently EMF can be improperly reflected in a similar manner as well. And if true then imagine turning your pillow into one of these concentrated spots and then lying there for 8 hours every evening.
-
I wanted to share some thoughts on this.
I've experimented with various concepts for blocking emf, as I am electrosensitive (or I've learned how to notice the subtle effects). EFs are the easiest to block, and perhaps are the most ubiquitous in homes with lots of electric powered devices and appliances. Dependent on the voltage of the field (which is directly related to how much power is running through the device/wire/apparatus) there are increasingly noticeable biological effects (in my experience at least) ranging from induced fatigue to general localized discomfort particularly in the abdomen to prickling of the skin to impedance of linear thought processes.
A box lined with copper mesh which is then grounded will eliminate these. I've found it necessary as well to wrap the power carrying wires in the mesh to negate the fields that build around the wire, ensuring the mesh is connected to the grounded box. Cycling between exposure to the fields directly and then when they're blocked helped me to learn the feel of the difference, as well as measurements utilizing the grounded multimeter 'human capacitor' technique and a professional emf detector.
Some devices I've found to be the worst offenders are fans, lamps, power bricks, surge protectors. Surge protectors
Wired computer networks can be disastrous emf-wise if not grounded as the eth cables tend to move voltage around when connected to powered devices like routers and computers. The solution to this is the use of shielded cat6 eth cables with metal ends on the plugs, onto which a copper wire can be wound tightly and grounded, eliminating the voltage potential of the entire wire and reducing that of the devices.
I've experimented with growing plants in proximity to EFs, and although they grow and aren't impeded as much as wifi proximate plants, there are clearly noticeable differences in terms of leaf warping and flowering stoppage. Ive only tested with morning glories and peppers so far though.
MFs are a different animal, but thankfully generally seem harder to be exposed to. I've noted them to typically exist around motors, like in fans. Distance is best for these, as there's no easy way to block them outside of some metal apparatus which can divert the fields.
I've also suspected that various metal concentrations in the body will be effected by fields as well as nervous signals, but I haven't personally experimented with this more complicated area. Probably best to ensure limited exposure to fields, good detox of 'bad' metals.
-
@OliverCloasov I'm regards to the copper lined box, I forgot to mention that this was to house the surge protector and power bricks for my computer and devices.